Installation guides
Installation
Ventilation, hose and power cord
The ventilation can be routed in the direction works best for your home. The pipe fittings fit standard pipes ø40 mm and can be run through a wall or floor, then angled downward or upward. We recommend completing the hose and pipe installation before mounting the toilet against the wall.
Pipe fittings included.
To pull the ventilation pipe backwards through the wall, mount pipe bend B on the toilet.
To pull the ventilation pipe backwards to the side, mount pipe bend B on the toilet and then A.
To pull the ventilation pipe through the floor, mount pipe bend B on the toilet and then A.
Connect the urine hose.
Plug in the power cord.
Installation
Wall mount
Mount Luna to the wall according to the instructions below.
Remove the plastic protection from the tape.
Slide the toilet against the wall to the desired position.
Carefully pull the toilet out from the wall and make sure the drill template stays on the wall.
Drill with the appropriate drill bit for your wall: 6 mm for plugs, 2 mm for wooden wall without plug.
Use the supplied screw and washer. For materials other than wood, use appropriate fasteners.
Push the toilet against the wall bracket.
Secure the toilet with the 2 black screws.
Frequently asked questions
No, you can easily install the toilet yourself, as long as you've prepared holes for ventilation and the urine hose in the floor or wall.
